Learn how to make a weighted blanket for anxiety, including a video on why weighted blankets help!
Have you hear about weighted blankets for anxiety?
A lot of people find them super helpful — adults and children alike.
There are all sorts of treatments for anxiety, from therapy and medication to exercise and meditation and aromatherapy or even a bubble bath.
I was pretty excited to hear about weighted blankets for anxiety because besides a hot bath, there’s not much I love more when I’m feeling really anxious than curling up under the sheets with a book.
How Does a DIY Weighted Blanket for Anxiety Work?
I’m no expert, you guys. You should always discuss things like this with a healthcare professional.
But here’s an article on why you should use a weighted blanket for anxiety.
They say it can help lower your cortisol (stress hormone) levels by “grounding” your body during sleep. Essentially, by weighing you down, it could help your body physically relax and then mentally relax when the accompanying stress hormone decrease kicks in.
Lowering your cortisol levels can help regulate things like:
- Weight gain
After reading all that, are you as excited as I am to give it a try?
Save This for Later – Pin It!
Video: Why to Make a Weighted Blanket
Not Ready to Make a Weighted Blanket Yourself?
If learning how to sew a weighted blanket for anxiety seems a bit daunting, that’s okay. You can always buy one.
The only thing is that weighted blankets can get really pricey. Be sure to read reviews if you’re going to invest in an expensive one.
Here are a few places to buy a weighted blanket:
Other DIY Sewing Projects You Might Like
- How to Sew a Super Simple Skirt (no pattern needed!)
- Get to Know Your Sewing Machine
- How to Add Pockets to a Skirt
- How to Sew a Turban Headband
- DIY Anthropologie Inspired Tassel Throw Pillow
- How to Sew a Cocoon Cardigan
Have fun and go crazy picking out the fabric for this. You could do the same fabric on both sides, but it’s fun to mix and match, too! The supply list contains affiliate links, so I may make a small commission at no additional charge to you.
- 1.5 yards of extra wide flannel in a solid color
- 1.5 yards of extra wide flannel in a complementary pattern
- All-purpose thread in a complementary or matching color
- 52″ x 52” quilt batting*
- Sewing machine
- Measuring tape
- Straight pins
- T-square (Optional, helps with measuring and marking even rows and columns)
- Empty wrapping paper cardboard roll to use as a funnel
- Weighted pellets: Amount depends on weight of blanket. See instructions to calculate the right amount. You only need poly OR glass, not both. They’re both machine-washable.
- Sewing scissors
*The quilt batting will make your blanket more durable, but you could try leaving it out if you want something less hot.
Instructions for How to Make a Weighted Blanket for Anxiety
1. Wash and dry both pieces of flannel and cut off any loose strings.
2. Lay out the flannel and cut each piece into a 52″ x 52” square.
3. Cut your quilt batting into a 52″ x 52″ square.
Tip: The quilt batting will make the blanket sturdier and warmer. If you want it to be really lightweight and aren’t as worried about durability, you could try to omit the batting.
4. Lay all pieces of fabric on top of each other: first quilt batting on the bottom, then the solid-colored flannel face-up, and finally the patterned flannel face-down on top of the stack.
5. Make sure all 3 pieces are the same size, and if not, measure and cut off any uneven sides.
6. Pin three of the four sides of the blanket together, one at a time, leaving one end open, like a pillowcase.
7. Sew the three pieces of fabric together on the three pinned sides one at a time using a straight stitch. And make sure to back-stitch at each end.
Remove the pins as you go.
8. Your blanket should now look look a stitched pillowcase.
Flip it right-side-out from the open side that hasn’t been sewn yet.
9. You should now have a pattern on top, quilt batting inside, and a solid color on the bottom.
10. Make sure the edges/corners are smooth and flat (use an iron if needed).
11. Next, top-stitch along the the sides that were previously sewn on the top of the fabric for a decorative look and to stabilize the pieces together.
12. Then you should lay your blanket flat.
13. With the opening as the top of your blanket, measure the width of your fabric from top stitch to top stitch and divide that number by eight. This is how wide your eight columns will be. Do the same for the rows.
Mine were 6.375” wide, but yours may slightly differ depending on the how close you sewed towards the edge.
14. Use a ruler/measuring tape to mark the lines with pins to make even columns. This picture is wonky, and t’s hard to see them in this image, but I marked the heads of the pins with red dots.
Sew a vertical straight stitch all the way through for each column.
Figuring Out How Heavy Your DIY Weighted Blanket Should Be
15. Next you will want to figure out the weight you want your blanket.
Your blanket should be 5-10% of the weight of the person you are making it for. For example, for a 150-pound person, you want a 7.5-15 pound blanket. Similarly, for a 200-pound adult, 5-10% of their weight would yield a 10-20 pound blanket.
This blanket will have 64 squares, so divide the total weight by 64 to calculate how much poly pellet should go into each square. A kitchen scale is great for measuring this.
16. Since this blanket is for a 150-pound person it weighs about 10 pounds. It has approximately 1/2 cup of poly pellets in each square.
How to Add Weight to the Blanket
17. Slide the cardboard roll into each column, one at a time, and add enough poly pellets for one square. Because this one has 1/2 cup per square, I poured 1/2 cup into each of the eight columns.
Tip: Above all, make sure you pour the poly pellets in the same side of the blanket each time. I poured them in between the batting and the patterned fabric.
18. Once you’ve added your first set of pellets to each column, then carefully and closely pin the row across using the measurement you calculated in Step 13.
Tip: Use a T-square here to make sure your rows are perpendicular to your columns for nice, even squares.
Tip: In case you’re having trouble visualizing it, you’re pinning parallel to the bottom of the blanket to enclose the pellets inside the first row of squares.
19. Carefully sew a straight stitch along the line, removing the pins as you go.
Tip: Try to avoid the pellets because they could break your sewing needle. In other words, use lots of pins to keep the pellets on the proper side of the line.
18. Repeat step 16 until you have 8 rows across and vertically.
19. To finish the blanket, fold the fabric on the top of the blanket inward about an inch. Pin it closed, and top stitch across the top of the blanket.
20. Finally, double stitch the top of the blanket so the poly pellets stay in securely.